Facts
Only with the high-performance sports brake system, in combination with high power and a sports suspension, can the perfect synthesis of driving dynamics and active safety be achieved.
The 6-piston HEICO high-performance sports brake system sets standards in terms of deceleration, dosing and stability. The brake callipers are designed for maximum stiffness and made of high-strength aircraft aluminium, which reduces the unsprung mass by an impressive 2.5 kilograms per brake caliper compared to the already very good Polestar Engineered brake system and thus benefits the driving dynamics.
Together with the 396 millimetre large, perforated and internally ventilated brake discs, the steel flex brake lines and the tuned sports brake pads, this results in a fast, powerful and well controllable response and a shortened braking distance. A V60 T6 Recharge (with a full tank and identical Pirelli P Zero tyres) stops after an impressive 33.3 metres at full braking from 100 km/h and decelerates with 1.36 g at peak. The comparable series values are 37.8 metres and 1.33 g.
Special
Significantly larger brake disc diameter and thickness compared to series, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect in terms of flow). Thermally quenched and tempered brake discs. The complex design of the brake disc increases the surface area by around 80 %. This considerably reduces the temperature of the brake disc and thus also its wear. At the same time, this increases the stability.
Quality
Brake callipers made of high-strength and highly tempered aircraft aluminium, hard anodised and coated 3 times in HEICO Blue
Scope of delivery
2 front brake calipers in HEICO Blue, perforated and internally ventilated front brake discs, front sports brake pads, steel flex brake lines front and rear, mounting kit
Approval
Including parts expert opinion according to §19.3 (StVZO) and conformity certification (CH) for hassle-free modification acceptance and registration
Installation
Analogue to the standard brake. Correct running-in of the brake system according to our instructions is a requirement for possible later warranty claims and guarantees the best possible braking performance and service life.
Guarantee
Up to 60 months / 150.000 km guarantee from first registration. Scope oriented towards to that of the Volvo Warranty.
Notes
Please note possible restrictions or information:
- Only in conjunction with HEICO SPORTIV VOLUTION® V and VOLUTION® X alloy wheels in 20 and 21 inch. Please contact our sales team before ordering.
- Braking noises can occur under different conditions due to the heavy-duty materials. If these are temporary or situational, they do not represent a safety or quality problem. In most cases, it is possible to eliminate the noise with the correct braking behaviour.
- Due to the increased friction of the brake system, more brake dust is generated. It is important to remove brake dust at regular intervals by washing the vehicle or wheels to prevent it from burning into the rim surface.
Installation & registration costs
Costs for installation and, if desired, registration with HEICO SPORTIV, D-64331 Weiterstadt:
Installation cost (
30AW
): |
714.00 EUR
incl. 19% German VAT
|
Registration cost §19 StVZO: - for one product, with several products price on request |
118.00 EUR incl. 19% German VAT |
Note: 1h = 10AW |
Installation instruction
Product dimensions & weight
Size and weight including the transport packaging:
Legal notices & guarantee
1. Country specific note
Please note that due to country-specific guidelines and requirements for the homologation of an accessory, there may be deviations in the scope of performance and validity of our legal information.
The information provided refers exclusively to the legal situation and requirements in Germany and Switzerland.
2. Guarantee & guarantee extension
(Status August 2024)
Products from HEICO SPORTIV stand for: Designed in Germany. Engineered in Germany. Produced in Germany. All products are developed and produced according to the highest manufacturer standards and homologated in accordance with strict German and Swiss approval laws. They are tested and have expert opinions according to §19 StVZO or general operating permit (ABE) or a conformity certificate (CH).
Not for products that are marked as only for export.
This, as well as the serious and comprehensive HEICO SPORTIV guarantee of 24 months / 80,000 km underlines our high quality standards.
In addition, you can extend the HEICO SPORTIV guarantee by another 36 months and 70,000 km to a total of 60 months / 150,000 km - at no extra charge!
All you have to do is fill out the registration for the HEICO SPORTIV guarantee extension and you will enjoy maximum protection and safety from now on.
The key facts in the overview:
- Up to 60 months / 150,000 km guarantee from first registration on all products - at no extra charge!
- In scope and handling based on the Volvo manufacturer's guarantee (country-specific)
- Incl. coverage of possible consequential damages through HEICO SPORTIV e.motion® performance enhancements (country-specific)
- Including mobility guarantee (country-specific)
- Incl. parts certificate according to § 19 StVZO or ABE and conformity certification (CH). Except for products that are marked as for export only
- Technical online and telephone support Monday to Friday from 09:00 - 17:00 (CET)
Register now and benefit from five years / 150,000 km HEICO SPORTIV guarantee.
3. Legal information
Legal information on the retrofitting of accessories.
The retrofitting of accessories may make an acceptance and registration obligation in the vehicle documents legally mandatory.
The general type approval of the vehicle expires through the installation of accessories subject to acceptance and registration if the acceptance of the accessory installation has not been carried out immediately by an officially recognised test facility in accordance with § 19 StVZO and confirmed in accordance with § 22 StVZO. The accessories must be entered in the vehicle documents.
Due to the fact that there are different registration documents and legal requirements, the following procedure should be followed with regard to the facts of the case:
For accessories with registration-free ABE (e.g. exterior parts):
The accessories are delivered with ABE and are registration-free. If the installation is carried out with other products from which an interaction can be caused, a change acceptance with costs can become necessary according to StVZO § 19.3 or § 19.2 in connection with § 21.
For accessories with non-registration-free ABE (e.g. alloy wheels):
These accessories will be supplied with an ABE. According to the KBA specifications, a chargeable modification acceptance is required.
If the installation is carried out with other parts which may interact with the accessory, an individual approval (StVZO § 19.2 in connection with § 21) may be required.
For accessories with part certificates (e.g. performance upgrade):
The accessories will be delivered with a parts certificate. A chargeable modification acceptance in accordance with StVZO 19.3 is mandatory, otherwise the vehicle's operating licence expires. If the attachment/installation is carried out with other parts that may interact, the necessity of a chargeable individual approval (StVZO § 19.2 in conjunction with § 21) may arise.
For accessories subject to acceptance and registration without supplied approval documents (e.g. performance upgrades for export markets):
Even without a parts certificate, an registration in the vehicle documents is possible with an individual inspection at a recognised test institute for which a fee is charged. As the exact procedure and costs for an individual inspection vary from case to case, you should contact the relevant testing institute directly for details of the individual inspection in your case.